Home > Safety Device > High Resolution Automatic Die Monitoring System [MICRON2] 1.  High Accuracy with 0.1 micro m Resolution 2.  Easy Operation. 3.  Large Liquid Crystal Display. 4.  Digital & Bar Graph Indication. 5.  Monitor a Change with the Passage of Time at the BDC. 6.  Rich Sensor Variations. -  Bar Graph Displays deviation of detected value from setting value, if it's minus in the left and plus in the right. (Laterally divided into 5 segments each and 0 positions in the center.) e.g.) In case of setting value:10 Bar Graph (unit: micron) When setting value is less than 5, it displays same as the case of 5. While setting of monitoring value, the bar graph indicates position of the bottom dead center (BDC) functioning as a gap gauge. -  Detecting Method MICRON II is slug detecting device for which a high performance proximity switch is employed. By monitoring the distance between the lower die and stripper every stroke in 0.1 micro m accuracy, it outputs also signal in a flash when exceeding the setting range. -  Sensor Heads Variations Rich variations of sensors are provided Power AC100V to 240V 50 or 60Hz Output Contacts 1A/1B (Emergency Stop, Aux-Stop) Power Consumption Less than 15W Repeatability 1 micro m or 0.1 micro m(at high resolution) Ambient Temperature -10 to 50(Celsius) Max.Operating Speed 2,400 spm Number of Channels 4 Sensing Distance 0.8mm to 1.8mm Sensor Proximity Sensor for Slug Detection